LT1260IS#PBF
| Parameters | |
|---|---|
| Power Supplies | +-5/+-15V |
| Number of Circuits | 3 |
| Operating Supply Current | 5mA |
| Slew Rate | 1600V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 52 dB |
| Current - Input Bias | 20μA |
| Voltage - Supply, Single/Dual (±) | 4V~30V ±2V~15V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 130MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 130000 kHz |
| Voltage Gain | 69dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 90μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1260 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
LT1260IS#PBF Overview
In order to protect the op amps, a 16-SOIC (0.154, 3.90mm Width) case is used. An op amp ic of the Current Feedback type. Instrumentation amplifier is delivered in a Tube case. We are approaching the 16h termination of the year. The total number of pins on linear amplifier is 16. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 16 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 2mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using an 5mA supply current, this operational amplifier ics can be operated. Maintain 69dB as the voltage gain. The buffer amp consists of 3 circuits in total.
LT1260IS#PBF Features
16 Pins
supply voltage of 15V
69dB voltage gain
LT1260IS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1260IS#PBF Instrumentational OP Amps applications.
- Oscilloscopes
- RF cable systems
- Signal transformation
- High gain DC amplifier
- High/low-pass filter circuit
- Addition operation circuits
- Radiation thermometry transducers
- Displayers for aircraft and air transportation control systems
- Communication
- Video computer boards
