LT1336CS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 10V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1336 |
| Pin Count | 16 |
| Output Voltage | 75V |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 12V |
| Output Current | 1.5A |
| Supply Current-Max | 40mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 500 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 200ns |
| Fall Time (Typ) | 140 ns |
| Turn-Off Delay Time | 600 ns |
| Output Polarity | TRUE |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 130ns 60ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.5 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.6 µs |
| High Side Voltage - Max (Bootstrap) | 60V |
| Height | 1.498mm |
| Length | 10.01mm |
| Width | 3.988mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1336CS#PBF Overview
A higher degree of flexibility is achieved by adopting its 16-SOIC (0.154, 3.90mm Width) package.Gate drivers is package in Tube case.For its configuration, it incorporates 2 drivers.Surface Mount is the way in which it is mounted.Using a 10V~15V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.There is a gate type of N-Channel MOSFET in this design.There is a temperature range for this device of 0°C~125°C TJ.Non-Inverting is used as the input type.Its configuration is based on a total of 16 terminations.You will find various related parts under the base part number LT1336.Mosfet driver is configured wMosfet driverh 16 pins when designing.Mosfet driver is designed specifically to run on 12V volts of power.There is a maximum output current of 1.5A that can be achieved.There are various useful electronic components in its subcategory MOSFET Drivers.The number of component pins is 16.A high-side voltage can be set up to 60V (Bootstrap).1.5A is the maximum output current supported by the device.As a result, a voltage of 75V is produced.The operating supply voltage should be set at 12V.The input is characterized by SCHMITT TRIGGER.The supply current can not exceed 40mA when operating.
LT1336CS#PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 60V
LT1336CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1336CS#PBF gate drivers applications.
- Industrial motor drives - compact, standard, premium, servo drives
- Pulse transformer drivers
- Automotive Applications
- Isolated Gate Driver Supplies
- Motor Controls
- Telecom switch mode power supplies
- RGB applications
- Line drivers
- 3-Phase Motor Inverter Driver
- Isolated Supplies for Motor Control
