LT1336IS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Rated DC | 20V |
| Technology | BIPOLAR |
| Voltage - Supply | 10V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Current Rating | 1.5A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1336 |
| Pin Count | 16 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 12V |
| Supply Current-Max | 40mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 500 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 200ns |
| Fall Time (Typ) | 140 ns |
| Turn-Off Delay Time | 600 ns |
| Output Polarity | TRUE |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 130ns 60ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.5 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.6 µs |
| High Side Voltage - Max (Bootstrap) | 60V |
| Length | 9.906mm |
| Width | 3.899mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1336IS#PBF Overview
A higher level of flexibility is provided by its 16-SOIC (0.154, 3.90mm Width) package.Tube represents the packaging method.For its configuration, it incorporates 2 drivers.Its recommended mounting way is Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 10V~15V supply voltage.N-Channel MOSFET is the gate type used for this design.This device allows temperatures in the range of -40°C~125°C TJ.The input type is Non-Inverting.Mosfet driver is based on 16 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number LT1336.The pins are configured with 16 when designing the chip.A supply voltage of 12V is required for operation.Mosfet driver is possible for the output current to be as low as 1.5A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.There are 16 component pins on the board.High-side voltage - Max (Bootstrap) can be as low as 60V.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 12V.SCHMITT TRIGGER represents its input.As long as the supply current stays below 40mA, the device will work properly.
LT1336IS#PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 60V
LT1336IS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1336IS#PBF gate drivers applications.
- Active filtering
- Portable Navigation Devices
- Smart Phones
- Solar power supplies
- High frequency line drivers
- Topologies
- 3-Phase Motor Inverter Driver
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Pulse transformer drivers
- Power factor correction (PFC) circuits
