LT1339CN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | LT1339 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.25V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | Up to 20V |
| Control Features | Current Limit, Enable, Phase Control, Soft Start |
| Topology | Boost, Forward Converter |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 20mA |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 90% |
| Clock Sync | Yes |
| Height Seated (Max) | 3.937mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
LT1339CN#PBF Overview
It comes in the 20-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 1 output generation. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are Up to 20V. Qualified to work in a 0°C~70°C TA dc switcher. The Through Hole makes it ideal for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Phase Control, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. An array of 20 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. LT1339 can be searched for other relevant dc to dc converter ics. Specifically, switching converter falls under the Switching Regulator or Controllers category. According to the test statistics, DC regulator outputs 1.25V voltage. It is not recommended to supply more current to the controller than 20mA.
LT1339CN#PBF Features
Transistor Driver Outputs
Current Limit, Enable, Phase Control, Soft Start
PULSE WIDTH MODULATION
LT1339CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1339CN#PBF DC to DC converter applications.
- Large fire protection systems
- Surge protection circuits
- Die casting equipment
- Surface processing equipment
- Low output voltage switching power supply circuits
- Printing equipment
- CNC system
- Planers
- Bending machines
- Balance equipment
