LT1352IS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| Series | C-Load™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1352 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Operating Supply Current | 250μA |
| Supply Current-Max | 0.76mA |
| Slew Rate | 200V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 13.4mA |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2700 kHz |
| Voltage Gain | 95.56dB |
| Average Bias Current-Max (IIB) | 0.1μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.05μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Wideband | NO |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1352IS8#PBF Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Op amps are Voltage Feedback types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 8 pins. The input offset voltage is 200μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using an 250μA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 95.56dB is the best course of action. Op amp has total of 2 elements. C-Load? corresponds to the op amp's series.
LT1352IS8#PBF Features
8 Pins
supply voltage of 5V
95.56dB voltage gain
LT1352IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1352IS8#PBF Instrumentational OP Amps applications.
- Multimedia playback equipment
- Test and measurement instruments
- Information processing
- Laptop
- Ultrasound transducers
- High gain DC amplifier
- Weak signal detection
- Signal filtering
- Broadcasting
- Multiplication circuits
