LT1356CN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2012 |
| Series | C-Load™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1356 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | +-2.5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 1mA |
| Supply Current-Max | 5.8mA |
| Slew Rate | 400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 800μV |
| Bandwidth | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10500 kHz |
| Voltage Gain | 91.13dB |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 300μV |
| Bias Current-Max (IIB) @25C | 0.3μA |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 12MHz |
| Height Seated (Max) | 3.937mm |
| Length | 19.558mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1356CN#PBF Overview
Op amp is packaged in 14-DIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. The number of terminations approaches 14. In this case, there are 14 pins on the board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 14 pins are located on the operational amplifiers. The input offset voltage is 800μV. For this electrical component, Through Hole is the recommended mounting type. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. Using a supply current of 1mA , this buffer op amp will be able to operate. 91.13dB should remain the voltage gain. Instrumentation amplifier has 4 channels on it. Buffer op amp series numbers are indicated by the C-Load?.
LT1356CN#PBF Features
14 Pins
supply voltage of 5V
91.13dB voltage gain
LT1356CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1356CN#PBF Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Multiplication circuits
- Video computer boards
- Mobile phone
- Strain gauges
- Home audio systems
- Addition operation circuits
- Communication device
- Semiconductor detectors
- earphone
