LT1356CS
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 800μV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10500 kHz |
| Voltage Gain | 91.13dB |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 300μV |
| Bias Current-Max (IIB) @25C | 0.3μA |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 12MHz |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2012 |
| Series | C-Load™ |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | LT1356 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 4 |
| Power Supplies | +-2.5/+-15V |
| Number of Circuits | 4 |
| Operating Supply Current | 1mA |
| Supply Current-Max | 5.8mA |
| Slew Rate | 400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 30mA |
LT1356CS Overview
A 16-SOIC (0.154, 3.90mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. The number of terminations approaches 16. There are a total of 16 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 16 pins on this chip. Regarding input offset voltage, buffer amplifier rates 800μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . This op amp can operate from a supply current at 1mA. Voltage gain should remain at 91.13dB. There are 4 circuits on op amps. There is an operating supply voltage rating of 4 for this operational amplifier, which is rated at the manufacturer. Instrumentation amplifiers are numbered by their C-Load? series.
LT1356CS Features
16 Pins
supply voltage of 5V
91.13dB voltage gain
LT1356CS Applications
There are a lot of Linear Technology/Analog Devices LT1356CS Instrumentational OP Amps applications.
- Home audio systems
- Computer workstations
- Television
- Biopotential
- Switching amplifier
- High input resistance broadband
- Micro signal measurement
- Navigation
- RF cable systems
- Hand-held batteries
