LT1357CS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 387mW |
| Operating Supply Current | 2mA |
| Power Dissipation | 387mW |
| Max Supply Current | 2.4mA |
| Slew Rate | 600 V/μs |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 120nA |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 25MHz |
| Gain Bandwidth Product | 22MHz |
| Voltage Gain | 93.06dB |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 2.5V |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 25MHz |
| Number of Amplifiers | 1 |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1357CS8#PBF Overview
There is a SOIC case package that contains the instrumentation amplifiers. The op amp ic has an array of 8 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 200μV. Operational amplifier can operate supply current at 2mA. The voltage gain should stay at 93.06dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. It should not lower than 0°C to operate buffer amplifier. At temperatures greater than 70°C, Instrumentation amplifier should not be used. The total number of elements in this buffer amplifier is 1. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 36V. In order to ensure that the instrumentation amplifier's supply voltage remains above 5V, it is recommended to keep it higher. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V. There are 1 amplifiers on the op amp.
LT1357CS8#PBF Features
93.06dB voltage gain
LT1357CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1357CS8#PBF Instrumentational OP Amps applications.
- Fission chambers
- Weak signal detection
- Power generator
- Video data acquisition
- Scintillation detectors
- Voltage regulation circuit
- Gaming industry
- High/low-pass filter circuit
- Home audio systems
- Automatic control
