LT1359CN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| Series | C-Load™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1359 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Power Supplies | +-2.5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 2mA |
| Max Supply Current | 9.6mA |
| Slew Rate | 600V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 120nA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 25MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 22000 kHz |
| Voltage Gain | 93.06dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 25MHz |
| Height | 3.3mm |
| Length | 19.56mm |
| Width | 6.48mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1359CN#PBF Overview
In order to protect the op amps, a 14-DIP (0.300, 7.62mm) case is used. Voltage Feedback-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 14. Buffer amplifier has a total of 14 pins. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. It has 14 pins that make up the linear amplifier. Op amp ic rates 200μV for input offset voltage. For this electrical component, Through Hole is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Operational amplifier can operate supply current at 2mA. There should be no change in the voltage gain at 93.06dB. As far as the device is concerned, buffer amplifier has 4 channels. The operating supply voltage of instrumentation amplifier is rated 18V voltage. Instrumentation amplifiers are numbered by their C-Load? series.
LT1359CN#PBF Features
14 Pins
supply voltage of 5V
93.06dB voltage gain
LT1359CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1359CN#PBF Instrumentational OP Amps applications.
- Proportional operation circuits
- Industrial control system
- Integrator circuits
- RF cable systems
- Image computer boards
- Fission chambers
- Video conversion and routing
- Signal transformation
- Inverse/same-phase proportional circuit
- High/low-pass filter circuit
