LT1359CS14#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| Series | C-Load™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1359 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 4 |
| Power Supplies | +-2.5/+-15V |
| Operating Supply Current | 2mA |
| Supply Current-Max | 11.6mA |
| Slew Rate | 600V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 120nA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 25MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 22000 kHz |
| Voltage Gain | 93.06dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 25MHz |
| Height Seated (Max) | 1.752mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
LT1359CS14#PBF Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. Voltage Feedback-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. There have been a total of 14 terminations over the past year. Buffer amplifier has a total of 14 pins on it. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 14-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 200μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. This op amp can operate from a supply current at 2mA. Keeping the voltage gain at 93.06dB is the best course of action. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 4. C-Load? corresponds to linear amplifier's series.
LT1359CS14#PBF Features
14 Pins
supply voltage of 5V
93.06dB voltage gain
LT1359CS14#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1359CS14#PBF Instrumentational OP Amps applications.
- Medical imaging
- Communication device
- Information processing
- Logarithmic operation circuits
- RF cable systems
- Signal amplification
- Image computer boards
- Band-stop filter
- Comparator
- Tablets
