LT1359IS14#PBF
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | C-Load™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1359 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 4 |
| Power Supplies | +-2.5/+-15V |
| Operating Supply Current | 2mA |
| Slew Rate | 600V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 120nA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 25MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 22000 kHz |
| Voltage Gain | 93.06dB |
| Average Bias Current-Max (IIB) | 0.9μA |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 25MHz |
| Height Seated (Max) | 1.752mm |
| Length | 8.65mm |
LT1359IS14#PBF Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 14 terminations. In this case, there are 14 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 14 pins. Regarding input offset voltage, buffer amplifier rates 200μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . You can run this op amp ic on 2mA . You should keep the voltage gain at 93.06dB for the time being. The linear amplifier consists of 4 different elements in total. C-Load? corresponds to the op amp's series.
LT1359IS14#PBF Features
14 Pins
supply voltage of 5V
93.06dB voltage gain
LT1359IS14#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1359IS14#PBF Instrumentational OP Amps applications.
- Multimedia playback equipment
- Subtraction operation circuits
- Television broadcasting equipment
- Band-pass filter
- Power control
- Precision measurement
- Image computer boards
- Ultrasound transducers
- RF cable systems
- MP3
