Parameters |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Package / Case |
DIP |
Number of Pins |
8 |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Number of Elements |
2 |
Number of Channels |
2 |
Number of Circuits |
2 |
Max Supply Voltage |
36V |
Min Supply Voltage |
5V |
Operating Supply Current |
4mA |
Max Supply Current |
9.6mA |
Slew Rate |
800 V/μs |
Common Mode Rejection Ratio |
79 dB |
Current - Input Bias |
300nA |
Output Current per Channel |
34mA |
Input Offset Voltage (Vos) |
300μV |
Bandwidth |
50MHz |
Gain Bandwidth Product |
37MHz |
Voltage Gain |
76.12dB |
Power Supply Rejection Ratio (PSRR) |
93dB |
Max Dual Supply Voltage |
18V |
Min Dual Supply Voltage |
2.5V |
Dual Supply Voltage |
9V |
Nominal Gain Bandwidth Product |
50MHz |
Number of Amplifiers |
2 |
Height |
3.3mm |
Length |
10.16mm |
Width |
6.48mm |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
LT1361CN8#PBF Overview
There is a DIP case in which the instrumentation amplifier is packaged. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 300μV. It is possible to operate this buffer amplifier from a supply current of 4mA . You should keep the voltage gain at 76.12dB for the time being. A instrumentation amplifier like this has 2 circuits. Buffer op amp is equipped with 2 channels on the device. For this linear amplifier to work, the temperature should not be below 0°C. A temperature greater than 70°C should not be used for the operation of buffer amplifier. It is possible to count 2 elements on this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 36V, which is suitable. In order to ensure that the instrumentation amplifier's supply voltage remains above 5V, it is recommended to keep it higher. It is recommended that you conduct this electronic part using the dual supply voltage of 18V. As you can see, the linear amplifier has 2 amplifiers.
LT1361CN8#PBF Features
76.12dB voltage gain
LT1361CN8#PBF Applications
There are a lot of Analog Devices, Inc. LT1361CN8#PBF Instrumentational OP Amps applications.
- MP3
- Wireless base stations
- Digital cameras
- Automatic control
- Exponential operation circuits
- Video computer boards
- Large motor controllers
- Precision measurement
- Tablets
- Measurements of Wheatstone bridge