LT1361CS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN (SN) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 4mA |
| Slew Rate | 800 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 79 dB |
| Current - Input Bias | 300nA |
| Output Current per Channel | 34mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 50MHz |
| Gain Bandwidth Product | 37MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 37000 kHz |
| Voltage Gain | 76.12dB |
| Average Bias Current-Max (IIB) | 1.5μA |
| Power Supply Rejection Ratio (PSRR) | 93dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 2.5V |
| Nominal Gain Bandwidth Product | 50MHz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1361CS8#PBF Overview
In order to protect the op amps, a SOIC case is used. An op amp ic of the OPERATIONAL AMPLIFIER type. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. In total, the buffer amplifier consists of 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 300μV. Operational amplifier can operate supply current at 4mA. You should keep the voltage gain at 76.12dB for the time being. A instrumentation amplifier like this has 2 circuits. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. Use op amps only at temperatures no higher than 70°C. With regard to the supply voltage, this electrical component is capable of working from under 36V. To keep the buffer amps' supply voltage higher than 5V. It is recommended that you conduct this electronic part using the dual supply voltage of 18V.
LT1361CS8#PBF Features
8 Pins
supply voltage of 5V
76.12dB voltage gain
LT1361CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1361CS8#PBF Instrumentational OP Amps applications.
- Blood pressure sensors
- E-book readers
- Gaming industry
- Computer workstations
- Automatic control
- Integrator circuits
- Logarithmic operation circuits
- Communication device
- Displayers for aircraft and air transportation control systems
- Radar
