LT1366CN8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | DIP |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 370μA |
| Max Supply Current | 1.04mA |
| Slew Rate | 0.13 V/μs |
| Common Mode Rejection Ratio | 81 dB |
| Current - Input Bias | 10nA |
| Output Current per Channel | 75mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 400 kHz |
| Gain Bandwidth Product | 400 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Dual Supply Voltage | 15V |
| Min Dual Supply Voltage | 900mV |
| Nominal Gain Bandwidth Product | 400 kHz |
| Number of Amplifiers | 2 |
| Height | 3.3mm |
| Length | 10.16mm |
| Width | 6.48mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1366CN8#PBF Overview
The linear amplifier is packaged in a DIP case which makes it easy for the consumer to handle. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 150μV voltage. Operational amplifier can operate supply current at 370μA. 126.02dB should remain the voltage gain. This op amp ic has 2 circuits. Instrumentation amplifier has 2 channels on it. To operate this buffer amplifier, the temperature must not be lower than 0°C. Use op amps only at temperatures no higher than 70°C. For the operating supply voltage of the op amp ic, there is a rating of 2. The operating supply voltage of the buffer op amp is rated at 28V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 36V. As a rule of thumb, the supply voltage of the op amp should not be lower than 2V. This electrical part should be conducted under the dual supply voltage of 15V volts when you conduct this part. As you can see, the linear amplifier has 2 amplifiers.
LT1366CN8#PBF Features
126.02dB voltage gain
LT1366CN8#PBF Applications
There are a lot of Analog Devices, Inc. LT1366CN8#PBF Instrumentational OP Amps applications.
- Signal amplification
- RF cable systems
- Portable docking station
- single/dual op amp sum and difference circuits
- earphone
- Polarized electrodes
- Biopotential
- MP3
- Active probe
- Radar
