LT1366CS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 370μA |
| Slew Rate | 0.13 V/μs |
| Common Mode Rejection Ratio | 81 dB |
| Current - Input Bias | 10nA |
| Output Current per Channel | 75mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 400 kHz |
| Gain Bandwidth Product | 400 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Dual Supply Voltage | 15V |
| Min Dual Supply Voltage | 900mV |
| Nominal Gain Bandwidth Product | 400 kHz |
| Number of Amplifiers | 2 |
| Height | 1.48mm |
| Length | 5mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1366CS8#PBF Overview
Op amp is packaged in SOIC case. It has 8 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 150μV. Using a supply current of 370μA , this buffer op amp will be able to operate. You should keep the voltage gain at 126.02dB for the time being. There are 2 circuits on op amps. There are a total of 2 channels available on the op amps. This op amp needs to be operated at a temperature of not less than 0°C degrees Celsius in order to function properly. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 70°C. For the operating supply voltage of the op amp ic, there is a rating of 2. The operating supply voltage of the buffer op amp is rated at 28V. This electric component can work from a voltage of under 36V as far as supply voltage is concerned. To keep the buffer amps' supply voltage higher than 2V. You should conduct this electronic component under the dual supply voltage of 15V. A total of 2 instrumentation amplifiers are present on the device.
LT1366CS8#PBF Features
126.02dB voltage gain
LT1366CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1366CS8#PBF Instrumentational OP Amps applications.
- Power transmission
- Thermocouples
- ECG equipment
- Test and measurement instruments
- Digital cameras
- High/low-pass filter circuit
- Exponential operation circuits
- High input resistance broadband
- Addition operation circuits
- Communication device
