LT1375IS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1375 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 25V |
| Output Voltage | 21.5V |
| Output Type | Adjustable |
| Max Output Current | 1.5A |
| Voltage - Input (Min) | 5V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 1.5A Switch |
| Max Output Voltage | 21.5V |
| Voltage - Output (Min/Fixed) | 2.42V |
| Topology | Buck, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 2.42V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1375IS8#PBF Overview
For optimal performance, this voltage regulator makes use of the Tube package. There are 8 terminations in this voltage regulator. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-SOIC (0.154, 3.90mm Width) package. The voltage regulator is configured with 1 outputs. On its output pins, this adjusting voltage regulator generates Adjustable output. Surface Mount-mounting is compatible with this switching regulator. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. There is a switching frequency of 500kHz for this voltage regulator 12v. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 5V. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 2.42V. This voltage regulator 12v features maximum design flexibility thanks to its 1.5A Switch output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 25V. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. Voltage regulator is designed to provide a nominal input voltage of 15V to meet the operation requirements. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. This DC/DC regulator belongs to the LT1375 family. The voltage DC DC switching regulator can produce is 21.5V volts. To operate the voltage regulator 12v, 8 pins are required. Ideally this switch regulator should have an output voltage of about 2.42V at the very least. A 1.5A A maximum output current is required to meet the switching regulator operation requirements. It provides the adjusting voltage regulator's maximal output voltage of 21.5V.
LT1375IS8#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
LT1375IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1375IS8#PBF Voltage Regulators applications.
- Energy management systems
- Product testing
- Boring machines
- Plate bending machines
- Overvoltage protection circuits in TV sets
- Arc suppression circuits
- Linear guide
- Analog precision reference circuits
- Drilling machines
- Surface processing equipment
