LT1394IS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| Series | UltraFast™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1394 |
| Pin Count | 8 |
| Output Type | CMOS, Complementary, TTL |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Max Supply Voltage | 12V |
| Nominal Supply Current | 8.5mA |
| Output Current | 20mA |
| Propagation Delay | 9 ns |
| Quiescent Current | 8.5mA |
| Response Time | 7 ns |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 2.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 64.08dB |
| Average Bias Current-Max (IIB) | 7μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Max Dual Supply Voltage | 6V |
| Input Bias Current | 4.5μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Voltage - Input Offset (Max) | 2.5mV @ ±5V |
| Current - Input Bias (Max) | 4.5μA @ ±5V |
| CMRR, PSRR (Typ) | 100dB CMRR, 100dB PSRR |
| Current - Output (Typ) | 20mA |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1394IS8#PBF Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Complementary, TTL output on this device.This chip is designed with the Tube package.As you can see, the comparator has8 terminals.Other Comparator like the device play a important role in the industry.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type with Latch .The total number of elements is 1 .Electronic comparator includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator has a pin count of 8 .You can find more pin-to-pin solutions by searching LT1394 .The comparator presents a quiescent current of 8.5mA volts.The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 8.5mA .A power supply of 5/+-5V is sufficient for the operation of the device.A voltage gain of 64.08dB can be determined from the voltage formula for the part.The comparator has a maximum supply voltage of 12V .Comparator electronics is part of the UltraFast? comparator series.
LT1394IS8#PBF Features
CMOS, Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 8.5mA
Voltage Gain: 64.08dB
LT1394IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1394IS8#PBF linear comparators applications.
- Analog front end
- Hand-Held Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Mobile Phones and Tablets
- High-Speed Sampling Circuits
- Appliances
- General-Purpose Portable Devices
- Point of load regulators
- Current and voltage sensing
- Consumer Medical Electronics
