LT1397CS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1397 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Operating Supply Current | 4.6mA |
| Slew Rate | 800V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 42 dB |
| Current - Input Bias | 10μA |
| Voltage - Supply, Single/Dual (±) | 4V~12V ±2V~6V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 65dB |
| Power Supply Rejection Ratio (PSRR) | 56dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1mV |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 400MHz |
| Height Seated (Max) | 1.752mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1397CS#PBF Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. This is a Current Feedback type op amp. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. A total of 14 terminations have been reported in the past few weeks. A total of 14 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 14 pins. There is an input offset voltage of 10mV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 4.6mA and 10 . Maintain 65dB as the voltage gain. 4 channels are available on the instrumentation amplifier.
LT1397CS#PBF Features
14 Pins
supply voltage of 5V
65dB voltage gain
LT1397CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1397CS#PBF Instrumentational OP Amps applications.
- Video computer boards
- Navigation
- pH (acidity)
- Logarithmic operation circuits
- Weak signal detection
- Addition operation circuits
- Automatic control
- Image computer boards
- Video data acquisition
- Gaming industry
