LT1468CS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1468 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Operating Supply Current | 3.9mA |
| Supply Current-Max | 6.5mA |
| Slew Rate | 22V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 96 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~15V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 30μV |
| Gain Bandwidth Product | 90MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 88000 kHz |
| Voltage Gain | 135.56dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.04μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 200MHz |
| Wideband | NO |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1468CS8#TRPBF Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 30μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . An 3.9mA volt supply current is needed for this linear amplifier to operate. 135.56dB should remain the voltage gain. For the operating supply voltage of the op amp ic, there is a rating of 1.
LT1468CS8#TRPBF Features
8 Pins
supply voltage of 5V
135.56dB voltage gain
LT1468CS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1468CS8#TRPBF Instrumentational OP Amps applications.
- Test equipment
- Automatic control
- Power control
- Weak signal detection
- Power generator
- High speed sample
- Band-pass filter
- Fission chambers
- Addition operation circuits
- Television broadcasting equipment
