LT1490CMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| Series | Over-The-Top® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1490 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5/+-15V |
| Number of Circuits | 2 |
| Current - Supply | 50μA |
| Slew Rate | 0.07V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 2V~44V ±1V~22V |
| Gain Bandwidth Product | 200kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 200 kHz |
| Average Bias Current-Max (IIB) | 0.008μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
| Current - Output / Channel | 25mA |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Voltage Gain-Min | 75000 |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
LT1490CMS8#PBF Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 8. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. The buffer amp consists of 2 circuits in total. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. To run supply current of buffer amplifier under 50μA. Instrumentation amplifiers are numbered by their Over-The-Top? series. To conduct electronic part voltage gain higher than 75000.
LT1490CMS8#PBF Features
8 Pins
supply voltage of 15V
Output Type: Rail-to-Rail
LT1490CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1490CMS8#PBF Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Radiation thermometry transducers
- Video amplifiers
- Television
- MP3
- Band-stop filter
- High/low-pass filter circuit
- Computer workstations
- Polarized electrodes
- Proportional operation circuits
