LT1490CN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| Series | Over-The-Top® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1490 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Power Supplies | 3/5/+-15V |
| Operating Supply Current | 50μA |
| Supply Current-Max | 0.17mA |
| Slew Rate | 0.07V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 2V~44V ±1V~22V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 110μV |
| Bandwidth | 200 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 123.52dB |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 250μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 180 kHz |
| Height | 3.3mm |
| Length | 10.16mm |
| Width | 6.48mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1490CN8#PBF Overview
A 8-DIP (0.300, 7.62mm) case is used to package the op amp. There are two types of operational amplifiers in this circuit. A Tube case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. In this case, there are 8 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 8-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 110μV voltage. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 50μA . You should keep the voltage gain at 123.52dB for the time being. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. A voltage rating of 2 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 28V voltage. Over-The-Top? is the number that corresponds to the series of the buffer op amp.
LT1490CN8#PBF Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
Output Type: Rail-to-Rail
LT1490CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1490CN8#PBF Instrumentational OP Amps applications.
- MP3
- Ultrasound transducers
- Precision measurement
- Information processing
- Communication
- Vehicle electronics
- Fast A/D and D/A converters
- Displayers for aircraft and air transportation control systems
- Non-polarized electrodes
- Test and measurement instruments
