LT1510CS8#PBF

Constant - Programmable LT1510 8-SOIC (0.154, 3.90mm Width) Tube 8 Terminals 8 Pin

Manufacturer: Linear Technology/Analog Devices
Nocochips NO: 471-LT1510CS8#PBF
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 625
Description: Constant - Programmable LT1510 8-SOIC (0.154, 3.90mm Width) Tube 8 Terminals 8 Pin (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1998
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
HTS Code	8542.39.00.01
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	LT1510
Pin Count	8
JESD-30 Code	R-PDSO-G8
Qualification Status	Not Qualified
Output Voltage	2.465V
Input Voltage-Nom	16V
Analog IC - Other Type	BATTERY CHARGE CONTROLLER
Input Voltage (Min)	8V
Control Mode	CURRENT-MODE
Output Current-Max	2A
Input Voltage (Max)	28V
Control Technique	PULSE WIDTH MODULATION
Supply Current-Max (Isup)	4.5mA
Switcher Configuration	SINGLE
Switching Frequency-Max	200kHz
Fault Protection	Over Voltage
Battery Chemistry	Multi-Chemistry
Voltage - Supply (Max)	28V
Current - Charging	Constant - Programmable
Charge Current - Max	1.5A
Battery Pack Voltage	20V Max
Height Seated (Max)	1.752mm
Length	4.9025mm
Width	3.899mm
RoHS Status	ROHS3 Compliant

LT1510CS8#PBF Overview

It is included in the Tube package for convenience.The package that is included with it comes in the shape of a 8-SOIC (0.154, 3.90mm Width).A mounting type of Surface Mount has been specified for this device.This is the right thing to do: set the temperature to 0°C~70°C TA.The device relies on an analog IC called BATTERY CHARGE CONTROLLER to operate.If the device needs to be charged, it must be supplied with Constant - Programmable current.By using the base part number LT1510, related parts can be found for this device.It has a total of 8 terminations.It is a 20V Max voltage for the battery pack.8 pins are attached to it.The device has a maximum charging current of 1.5A.28V is the maximum supply voltage for the device.As long as the output voltage is set to 2.465V, then there is a possibility of optimal efficiency being achieved.Vsup (maximum supply voltage) is set in the command to 4.5mA.A 16V input voltage is applied to the device.Input voltage must be at least 8V volts.At most, the part has a switching frequency of 200kHz.This device accepts a maximum input voltage of 28V.