LT1510CS#PBF
| Parameters | |
|---|---|
| Output Voltage | 2.465V |
| Input Voltage-Nom | 16V |
| Power Supplies | 16V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Input Voltage (Min) | 8V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4.5mA |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 200kHz |
| Fault Protection | Over Voltage |
| Battery Chemistry | Multi-Chemistry |
| Voltage - Supply (Max) | 28V |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.5A |
| Battery Pack Voltage | 20V Max |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1510 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
LT1510CS#PBF Overview
It is included in the Tube package for convenience.Located in package 16-SOIC (0.154, 3.90mm Width), it can be found there.Mounting type Surface Mount is chosen for the device.Ideally, the temperature should be set to 0°C~70°C TA in order to ensure reliable performance.To operate the device, an analog IC called BATTERY CHARGE CONTROLLER is used.It is necessary to supply the device with Constant - Programmable current in order to charge it.The base part number LT1510 can be used to locate related parts for this device.It has 16 terminations.Batteries have a voltage of 20V Max.The device has a total of 16 pins.On the device, it is listed as having a charge current of 1.5A.28V is the maximum supply voltage for the device.In theory, it should be able to run on a battery that has a voltage of 16VV.The efficiency of the system can be maximized if the output voltage is 2.465V.Subcategory 0 is home to this device.In most cases, the maximum supply voltage (Vsup) is set to 4.5mA.The part's power supply is set to 16V.A 16V input voltage is applied to the device.The minimal input voltage is 8V volts.This part has a maximum switching frequency of 200kHz.This device accepts a maximum input voltage of 28V.
LT1510CS#PBF Features
Battery pack voltage of 20V Max
Power Management Circuits subcategory
16-SOIC (0.154, 3.90mm Width) package
LT1510CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1510CS#PBF Battery Chargers ICs applications.
- Instruments and meters
- Electricity bank
- Home routers
- Man lift
- Modern LA
- Material handling
- Locomotive
- Electric tour bus
- Smart speakers
- Emergency/Security
