LT1510IS8#PBF
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1510 |
| Pin Count | 8 |
| Output Voltage | 20V |
| Input Voltage-Nom | 16V |
| Power Supplies | 16V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 7V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 1.5A |
| Min Input Voltage | 7V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 29V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4.5mA |
| Nominal Input Voltage | 28V |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 200kHz |
| Fault Protection | Over Voltage |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 12 |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 20V Max |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
LT1510IS8#PBF Overview
This can be found in the Tube package.There is a 8-SOIC (0.154, 3.90mm Width) package that comes with this item.Amounting type Surface Mount is the one associated with the device.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.A analog IC of BATTERY CHARGE CONTROLLER has been used in the design of this device.If the device needs to be charged, it must be supplied with Constant - Programmable current.This part number LT1510 can be used to find its related parts.It has a total of 8 terminations.A battery pack is going to have a voltage of 20V Max.There are 8 pins on it.There are 8 pins required in order for the product to function.Batteries with 16V should be able to power it.The device can withstand a supply voltage of 30V.In the case of 20V output voltage, there is a possibility of optimal efficiency.In order to operate, an output current of 1.5A is used.This device belongs to the subcategory of Power Management Circuits.Using a supply voltage as low as 7V will allow it to function.It was determined during the design process that Vsup (maximum supply voltage) should be set to 4.5mA.The power supply for this part is set to 16V.There is a 7V volt minimum input voltage requirement.The device is 16V input voltage.29V is the maximum input voltage it can handle.In the most extreme case, the part switches at 200kHz.
LT1510IS8#PBF Features
Battery pack voltage of 20V Max
Power Management Circuits subcategory
8-SOIC (0.154, 3.90mm Width) package
LT1510IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1510IS8#PBF Battery Chargers ICs applications.
- TV sticks
- Portable speaker systems
- Smart cameras
- Pallet jacks
- Marine buoy lights
- Battery backup applications
- Model aircraft
- Industrial handhelds
- Remote sensor
- Boat
