LT1511ISW#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1511 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Output Voltage | 2.465V |
| Input Voltage-Nom | 16V |
| Power Supplies | 16V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Input Voltage (Min) | 11V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 4A |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 7mA |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 230kHz |
| Fault Protection | Over Voltage |
| Battery Chemistry | Multi-Chemistry |
| Voltage - Supply (Max) | 28V |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 3A |
| Battery Pack Voltage | 20V Max |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
LT1511ISW#TRPBF Overview
It is contained in the package Tape & Reel (TR).Located in package 24-SOIC (0.295, 7.50mm Width), it can be found there.In this case, the device is mounted in the way of Surface Mount.The best thing to do is to set the temperature to -40°C~85°C TA.The device relies on an analog IC called BATTERY CHARGE CONTROLLER to operate.The device cannot be charged without Constant - Programmable current flowing through it.This part number LT1511 can be used to find its related parts.As a whole, it contains 24 terminations.As far as the battery pack is concerned, it is 20V Max.The device is equipped with a total of 24 pins.When charged at its maximum current, the device is rated at 3A.There is 28V maximum supply voltage for this device.Batteries with a 16V voltage are compatible with it.It is possible to achieve high efficiency by using an output voltage of 2.465V.Subcategory 0 is home to this device.Vsup (maximum supply voltage) is set to 7mA.The power supply for this part is set to 16V.The device has 16V voltage input at the moment.There is a minimum input voltage of 11V volts.A switching frequency of 230kHz is the maximum for the part.An input voltage of 28V is the maximum that can be applied to this device.
LT1511ISW#TRPBF Features
Battery pack voltage of 20V Max
Power Management Circuits subcategory
24-SOIC (0.295, 7.50mm Width) package
LT1511ISW#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1511ISW#TRPBF Battery Chargers ICs applications.
- Industrial
- GPS tracker
- Personnel carriers
- Drone
- Model aircraft
- Conventional charge
- Maintenance shops
- Electricity bank
- Portable devices
- Remote sensor
