LT1512IN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1512 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 30V |
| Input Voltage-Nom | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 29V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 1A |
| Min Input Voltage | 2.4V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 5.5mA |
| Switcher Configuration | SINGLE |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 |
| Voltage - Supply (Max) | 25V |
| Current - Charging | Constant - Programmable |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1512IN8#PBF Overview
There is a package called Tube that contains this item.A 8-DIP (0.300, 7.62mm) package is included with this item as part of its contents.There is a mounting type Through Hole specified for the device.It is best to set the temperature to -40°C~85°C TA in order to prevent the system from overheating.It uses an analog integrated circuit of type BATTERY CHARGE CONTROLLER.In order to charge the device, it needs to receive Constant - Programmable current.You can find this device's related parts by searching the base part number LT1512.Taking it as a whole, it has been concluded that there are 8 terminations to be found.It is equipped with 8 pins.In order for the product to be functional, it requires that you connect the 8 pins according to the instructions.Devices require 25V as their maximum supply voltage.Batteries with a 5V voltage are compatible with it.An input voltage that is equal to 29V can be applied to it without any problem.The possibility of optimal efficiency exists if 30V output voltage is used as the output voltage.There is 1A output current when the device operates.Devices in this category are classified as Power Management Circuits.A power supply voltage as low as 2.7V can be used for it and it will work as well as possible.It is configured to be 5.5mA for Vsup (maximum supply voltage).Regarding the power supply for the part, it is set to 5V.As far as the input voltage is concerned, it has a minimum of 2.4V volts.Voltage input for the device is 5V.30V is the maximum input voltage it can handle.
LT1512IN8#PBF Features
Power Management Circuits subcategory
8-DIP (0.300, 7.62mm) package
LT1512IN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1512IN8#PBF Battery Chargers ICs applications.
- Wireless headphones
- Marine buoy lights
- Fleet management
- Crosswalk marker lights
- Golf carts
- Portable medical instruments
- Laptops
- Material handling
- Forklift
- Electricity bank
