LT1513CR#PBF
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Package / Case | R |
| Number of Pins | 7 |
| Packaging | Bulk |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | 0°C |
| Frequency | 500kHz |
| Max Supply Voltage | 29V |
| Min Supply Voltage | 2.7V |
| Current - Output | 2A |
| Voltage - Output | 20V |
| Min Input Voltage | 2.4V |
| Max Input Voltage | 30V |
| Nominal Input Voltage | 25V |
| Number of Cells | 1 |
| Charge Current - Max | 2A |
| Height | 4.57mm |
| Length | 10.54mm |
| Width | 9.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LT1513CR#PBF Overview
For the R package, it is appropriate. Currently, there are 7 pins on it. The smart tools battery is packaged in a Bulk case. The minimum supply voltage for this electrical part should not be less than 2.7V volts. A voltage of 29V volts is recommended for this power IC. This system battery must be activated by a value of 0°C. It is suggested that it be used at temperatures below 125°C. There is 20V voltage output from it. The system battery input voltage can be powered under 30V. There is 2.4V voltage limit on the battery protector ic, so it can operate below 2.4V. Battery safety requires powering the battery below 2A.
LT1513CR#PBF Features
Available in R Package
with 7 Pins
LT1513CR#PBF Applications
There are a lot of Analog Devices, Inc. LT1513CR#PBF Battery Management ICs applications.
- Electric vehicles
- Grid power infrastructure
- Head up display (HUD)
- UAV
- Body ECU
- Electric street sweepers
- Utility vehicles
- Scooters
- ADAS sonar
- ADAS camera system
