LT1513IR#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1513 |
| Pin Count | 7 |
| Output Voltage | 20V |
| Max Output Current | 5A |
| Input Voltage-Nom | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 29V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 2A |
| Max Output Voltage | 20V |
| Min Input Voltage | 2.4V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 30V |
| Supply Current-Max (Isup) | 5.5mA |
| Nominal Input Voltage | 5V |
| Min Output Voltage | 2.7V |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 580kHz |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 |
| Voltage - Supply (Max) | 25V |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 20V Max |
| Length | 10.54mm |
| Width | 4.572mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1513IR#PBF Overview
I found it in the Tube package, which comes with everything you need.With this item, there is a TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package that comes with it.In this case, the device is mounted in the way of Surface Mount.The correct temperature setting is -40°C~125°C TJ.It uses an analog integrated circuit of type BATTERY CHARGE CONTROLLER.A charge of Constant - Programmable current is required to be applied to the device.This part number LT1513 can be used to find its related parts.It is possible to find a total of 7 terminations.It is a 20V Max voltage for the battery pack.In total, it has 7 pins.It requires pins 7 to function.In this case, the device's maximum supply voltage is 25V.Battery voltage should be 5V.An input voltage that is equal to 29V can be applied to it without any problem.Having the output voltage set to 20V may result in high efficiency.With a 2A output current, the operation is conducted.Devices in this category are classified as Power Management Circuits.The device can operate at as low a supply voltage as possible, such as 2.7V.5.5mA is set for Vsup (maximum supply voltage).When it comes to the part's power supply, it is set to 5V.The input voltage is set to 2.4V volts.A 5V voltage input is present in the device.A maximum input voltage of 30V volts can be applied to it.This part has a maximum switching frequency of 580kHz.In order for the operation to be carried out successfully, a maximum output supply voltage of 20V is required.In order to comply with the constraints, the maximum output current is reduced to 5A.
LT1513IR#PBF Features
Battery pack voltage of 20V Max
Power Management Circuits subcategory
TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package
LT1513IR#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1513IR#PBF Battery Chargers ICs applications.
- Tablets
- Truck dealers
- PDAs
- Electric lift car
- Remote sensor
- Industrial handhelds
- Smart speakers
- Wireless headphones
- Military equipment
- Electronic dictionary
