LT1635CS8#PBF
| Parameters | |
|---|---|
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 175 kHz |
| Voltage Gain | 113.06dB |
| Average Bias Current-Max (IIB) | 0.0055μA |
| Power Supply Rejection Ratio (PSRR) | 93dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 300μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 4.5μA |
| Nominal Gain Bandwidth Product | 175 kHz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1635 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 135μA |
| Max Supply Current | 200μA |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 92 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 1.2V~10V ±0.6V~5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 1.3mV |
| Bandwidth | 175 kHz |
LT1635CS8#PBF Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 1.3mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 135μA . Voltage gain should remain at 113.06dB. In total, there are 2 circuits on this buffer amplifier. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. There are 1 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3V.
LT1635CS8#PBF Features
8 Pins
supply voltage of 5V
113.06dB voltage gain
Output Type: Rail-to-Rail
LT1635CS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1635CS8#PBF Instrumentational OP Amps applications.
- Power generator
- Computer workstations
- Power control
- Differentiator circuits
- Medical instruments
- Voltage regulation circuit
- Polarized electrodes
- Signal transformation
- Logarithmic operation circuits
- Gaming industry
