LT1637HS8#PBF
| Parameters | |
|---|---|
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.05μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Nominal Gain Bandwidth Product | 1MHz |
| Wideband | NO |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| Series | Over-The-Top® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1637 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 230μA |
| Supply Current-Max | 0.37mA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 17nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~44V ±1.35V~22V |
| Output Current per Channel | 31.7mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 1.1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 118.06dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
LT1637HS8#PBF Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins. This linear amplifier should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 350μV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . An 230μA volt supply current is needed for this linear amplifier to operate. You should keep the voltage gain at 118.06dB for the time being. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. Op amp has total of 1 elements. The Over-The-Top? stands for the buffer op amp's serial number.
LT1637HS8#PBF Features
8 Pins
supply voltage of 15V
118.06dB voltage gain
Output Type: Rail-to-Rail
LT1637HS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1637HS8#PBF Instrumentational OP Amps applications.
- Proportional operation circuits
- Communication device
- Micro signal measurement
- Semiconductor detectors
- Television broadcasting equipment
- Integrator circuits
- Communication
- Voltage regulation circuit
- Information processing
- Video data acquisition
