Parameters |
Published |
2007 |
Series |
Over-The-Top® |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
LT1637 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Number of Elements |
1 |
Operating Supply Current |
230μA |
Supply Current-Max |
0.37mA |
Slew Rate |
0.4V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
17nA |
Voltage - Supply, Single/Dual (±) |
2.7V~44V ±1.35V~22V |
Output Current per Channel |
31.7mA |
Input Offset Voltage (Vos) |
350μV |
Gain Bandwidth Product |
1.1MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
1100 kHz |
Voltage Gain |
118.06dB |
Average Bias Current-Max (IIB) |
0.05μA |
Power Supply Rejection Ratio (PSRR) |
90dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
22V |
Voltage - Input Offset |
100μV |
Low-Bias |
NO |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.05μA |
Programmable Power |
NO |
Neg Supply Voltage-Max (Vsup) |
-22V |
Nominal Gain Bandwidth Product |
1MHz |
Wideband |
NO |
Height Seated (Max) |
3.937mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
LT1637IN8#PBF Overview
A 8-DIP (0.300, 7.62mm) case is used to package the op amp. An op amp of this type is a General Purpose-type. A Tube case is used to deliver the buffer op amp. We are approaching the 8h termination of the year. The total number of pins on linear amplifier is 8. This linear amplifier should be powered by an 15V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 350μV. This electronic component is recommended to be mounted using the mounting type Through Hole. With regard to operating temperature, this op amp functions well at -40°C~85°C. An 230μA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 118.06dB at all times. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The linear amplifier consists of 1 different elements in total. Over-The-Top? corresponds to linear amplifier's series.
LT1637IN8#PBF Features
8 Pins
supply voltage of 15V
118.06dB voltage gain
Output Type: Rail-to-Rail
LT1637IN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1637IN8#PBF Instrumentational OP Amps applications.
- Instrumentation
- Signal operation
- Portable electronic products powered by batteries
- Wireless base stations
- Portable docking station
- Multimedia playback equipment
- Radar
- Tablets
- High speed sample
- Industrial control system