LT1637MPS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| Series | Over-The-Top® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1637 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 230μA |
| Supply Current-Max | 0.37mA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 17nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~44V ±1.35V~22V |
| Output Current per Channel | 31.7mA |
| Input Offset Voltage (Vos) | 350μV |
| Bandwidth | 1.1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 118.06dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 100μV |
| Micropower | YES |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Nominal Gain Bandwidth Product | 1MHz |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1637MPS8#PBF Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. A Tube case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. In total, there are 8 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 350μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is important to note that this linear amplifier works well at a temperature of -55°C~125°C when it comes to operating temperatureOperational amplifier can operate supply current at 230μA. 118.06dB should be the voltage gain. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. Buffer op amp series numbers are indicated by the Over-The-Top?.
LT1637MPS8#PBF Features
8 Pins
supply voltage of 15V
118.06dB voltage gain
Output Type: Rail-to-Rail
LT1637MPS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1637MPS8#PBF Instrumentational OP Amps applications.
- MP3
- Weighing systems
- Video computer boards
- Television
- Laptop
- Power control
- High speed sample
- Proportional operation circuits
- Fission chambers
- Fast A/D and D/A converters
