LT1638CN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| Series | Over-The-Top® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1638 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5/+-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 205μA |
| Supply Current-Max | 0.7mA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~44V ±1.25V~22V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 600μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 44V |
| Voltage - Input Offset | 250μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.05μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.2MHz |
| Wideband | NO |
| Height Seated (Max) | 3.937mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1638CN8#PBF Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Tube case. We are approaching the 8h termination of the year. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 600μV. For this electronic part, it is recommended that you mount it with type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. It is possible to operate this buffer amplifier from a supply current of 205μA . Voltage gain should remain at 123.52dB. A linear amplifier like this has 2 circuits on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. 2 elements make up the design of this buffer amplifier. The Over-The-Top? indicates the series number of the op amp.
LT1638CN8#PBF Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
Output Type: Rail-to-Rail
LT1638CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1638CN8#PBF Instrumentational OP Amps applications.
- Exponential operation circuits
- Industrial control system
- High gain DC amplifier
- Fission chambers
- Fast A/D and D/A converters
- Communication device
- Tablets
- Video amplifiers
- Band-pass filter
- Weak signal detection
