LT1672IMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2001 |
| Series | Over-The-Top® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1672 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 1.9μA |
| Supply Current-Max | 0.0042mA |
| Slew Rate | 0.005V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 2.2V~36V ±1.1V~18V |
| Output Current per Channel | 1.5mA |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 12kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 12 kHz |
| Voltage Gain | 113.98dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES AVCL>=5 |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.36μA |
| Programmable Power | NO |
| Wideband | NO |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1672IMS8#PBF Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. Please take in mind that op amp should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It has 8 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 200μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureThe buffer amplifier is capable of operating from a supply current of 1.9μA . Voltage gain should remain at 113.98dB. A instrumentation amplifier like this has 1 circuits. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. Over-The-Top? is the number that corresponds to the series of the buffer op amp.
LT1672IMS8#PBF Features
8 Pins
supply voltage of 15V
113.98dB voltage gain
Output Type: Rail-to-Rail
LT1672IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1672IMS8#PBF Instrumentational OP Amps applications.
- Video conversion and routing
- Weak signal detection
- Medical instruments
- Integrator circuits
- Video amplifiers
- Car stereo
- Communication device
- Band-stop filter
- PDA
- earphone
