LT1677CN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1677 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 2.75mA |
| Max Supply Current | 3.4mA |
| Slew Rate | 2.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 60μV |
| Bandwidth | 7.2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6200 kHz |
| Voltage Gain | 133.98dB |
| Average Bias Current-Max (IIB) | 0.035μA |
| Power Supply Rejection Ratio (PSRR) | 108dB |
| Low-Offset | NO |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 20μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.4μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 7.2MHz |
| Height | 3.3mm |
| Length | 10.16mm |
| Width | 6.48mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1677CN8#PBF Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Tube case. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 15V. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. Op amp rates 60μV as input offset voltage. Through Hole is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges 0°C~70°C. It is possible to operate this buffer amplifier from a supply current of 2.75mA . There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V.
LT1677CN8#PBF Features
8 Pins
supply voltage of 15V
133.98dB voltage gain
Output Type: Rail-to-Rail
LT1677CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1677CN8#PBF Instrumentational OP Amps applications.
- Test and measurement instruments
- pH (acidity)
- ECG equipment
- Switching amplifier
- Power control
- Image computer boards
- Wireless base stations
- Micro signal measurement
- Large motor controllers
- Differentiator circuits
