LT1678CS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 2.5mA |
| Slew Rate | 6 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 400nA |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 20MHz |
| Gain Bandwidth Product | 20MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 19000 kHz |
| Voltage Gain | 131.6dB |
| Average Bias Current-Max (IIB) | 0.035μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 20MHz |
| Height | 1.48mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1678CS8#PBF Overview
Packaged in a SOIC case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. I would like to remind you that this buffer op amp should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 100μV. Using a supply current of 2.5mA , this buffer op amp will be able to operate. 131.6dB should be the voltage gain. This op amp ic has 2 circuits. To operate this buffer amplifier, the temperature must not be lower than -40°C. You should only use instrumentation amplifier at temperatures that are no higher than 85°C. The operating supply voltage of instrumentation amplifier is rated 5V voltage. With regard tp supply voltage, op amp is used under 36V. As a general rule, it is advisable to keep the op amp's supply voltage above 3V at all times. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V.
LT1678CS8#PBF Features
8 Pins
supply voltage of 15V
131.6dB voltage gain
LT1678CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1678CS8#PBF Instrumentational OP Amps applications.
- Professional videography
- Industrial applications including automation
- High input resistance broadband
- Logarithmic operation circuits
- Portable docking station
- Blood pressure sensors
- Hand-held batteries
- pH (acidity)
- Portable media players
- Video computer boards
