LT1678IS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 2.5mA |
| Max Supply Current | 6.8mA |
| Slew Rate | 6 V/μs |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 400nA |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 20MHz |
| Gain Bandwidth Product | 20MHz |
| Voltage Gain | 131.6dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 20MHz |
| Number of Amplifiers | 2 |
| Height | 1.498mm |
| Length | 5mm |
| Width | 3.988mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1678IS8#PBF Overview
In the package, you will find a SOIC-case to contain the op amp ic. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 100μV voltage. Operational amplifier can operate supply current at 2.5mA. Keeping the voltage gain at 131.6dB is the best course of action. On this buffer amplifier, there are 2 circuits. On the buffer amps, there are 2 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. You should only use instrumentation amplifier at temperatures that are no higher than 85°C. There are a total of 2 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. This electric component can work from a voltage of under 36V as far as supply voltage is concerned. A high supply voltage of more than 3V is recommended for the instrumentation amplifier's supply voltage. There should be a dual supply voltage of 18V for you to conduct this electrical part. As you can see, the linear amplifier has 2 amplifiers.
LT1678IS8#PBF Features
131.6dB voltage gain
LT1678IS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1678IS8#PBF Instrumentational OP Amps applications.
- Active probe
- Non-polarized electrodes
- Television
- Micro signal measurement
- PDA
- Laptop
- Differentiator circuits
- pH (acidity)
- Signal transformation
- Oscilloscopes
