LT1679CS#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 2.5mA |
| Max Supply Current | 13.6mA |
| Slew Rate | 6 V/μs |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 2nA |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 20MHz |
| Gain Bandwidth Product | 20MHz |
| Voltage Gain | 131.6dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 20MHz |
| Number of Amplifiers | 4 |
| Height | 1.48mm |
| Length | 8.74mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1679CS#PBF Overview
Op amp is packaged in SOIC case. There are 14 pins on this chip. Regarding input offset voltage, op amp rates 100μV. You can run this op amp ic on 2.5mA . It is recommended to keep the voltage gain at 131.6dB at all times. A instrumentation amplifier like this has 4 circuits. Instrumentation amplifier has 4 channels on it. To operate this buffer amplifier, the temperature must not be lower than -40°C. You should only use instrumentation amplifier at temperatures that are no higher than 85°C. According to the specifications of the buffer op amp, the operating supply voltage is rated at 4. The operating supply voltage of the buffer op amp is rated at 5V. With regard to the supply voltage, this electrical component is capable of working from under 36V. A voltage of 3V or higher is recommended for the linear amplifier's supply voltage. It is recommended that you conduct this electronic part using the dual supply voltage of 18V. A linear amplifier such as this has 4 amplifiers on it.
LT1679CS#PBF Features
131.6dB voltage gain
LT1679CS#PBF Applications
There are a lot of Analog Devices, Inc. LT1679CS#PBF Instrumentational OP Amps applications.
- High speed sample
- Communication
- Micro signal measurement
- RF cable systems
- Automotive sensors
- Portable electronic products powered by batteries
- Band-pass filter
- Automatic control
- Scintillation detectors
- Active probe
