LT1679IS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1679 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-18/2.7/36V |
| Number of Circuits | 4 |
| Operating Supply Current | 2.5mA |
| Supply Current-Max | 18mA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 19000 kHz |
| Voltage Gain | 131.6dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 20μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 20MHz |
| Wideband | NO |
| Height Seated (Max) | 1.752mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1679IS#PBF Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Tube case. A total of 14 terminations have been reported in the past few weeks. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 14 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 100μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. The buffer amplifier is capable of operating from a supply current of 2.5mA . 131.6dB should remain the voltage gain. On this instrumentation amplifier, there are 4 circuits that are connected together. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. Op amp has total of 4 elements.
LT1679IS#PBF Features
14 Pins
supply voltage of 15V
131.6dB voltage gain
Output Type: Rail-to-Rail
LT1679IS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1679IS#PBF Instrumentational OP Amps applications.
- Oscilloscopes
- Inverse/same-phase proportional circuit
- Proportional operation circuits
- Tablets
- High-frequency data acquisition systems
- Measurements of Wheatstone bridge
- Comparator
- Non-polarized electrodes
- High input resistance broadband
- Fast A/D and D/A converters
