LT1683EG#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1683 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive and Negative |
| Voltage - Supply (Vcc/Vdd) | 7.3V~20V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 2.7V |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.3A |
| Frequency - Switching | 250kHz |
| Input Voltage (Max) | 20V |
| Synchronous Rectifier | No |
| Duty Cycle (Max) | 46% |
| Clock Sync | Yes |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
LT1683EG#PBF Overview
It comes in the 20-SSOP (0.209, 5.30mm Width) package, which makes switching controller suitable for most applications. This dc motor controller can be used to generate outputs with 1 numbers. The pmic is packaged in Tube solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 7.3V~20V. A -40°C~125°C TJ dc switcher is not a problem. Using this switching controller, it is possible to switch at 250kHz. dc dc regulator can be generalized using Surface Mount. The dcdc regulator features Enable, Frequency Control, Soft Start for efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Switching converters are designed with the terminal (s) at position DUAL . The 20 terminations can be used for a wide range of dc switching. DC switcher's voltage input of 12V. LT1683 can be searched for other relevant dc to dc converter ics. Switching converter is a special type of Switching Regulator or Controllers. An input voltage of 2.7V is the minimum required for the dc dc voltage regulator. Considering the dc to dc regulator can only accept 20V input voltage, it is important to take note of this. The output value is set to the greatest value of 0.3A.
LT1683EG#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz
Enable, Frequency Control, Soft Start
LT1683EG#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1683EG#PBF DC to DC converter applications.
- Low output voltage switching power supply circuits
- Industrial controllers
- Power supplies of electronic gadgets
- Window air conditioners
- Injection molding machinery
- Program control systems
- Overvoltage protection circuits in TV sets
- Radio equipment
- Plate bending machines
- Series voltage regulation circuits
