LT1711CMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2001 |
| Series | UltraFast™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1711 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Complementary, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Supply Current-Max | 30mA |
| Response Time | 5.5 ns |
| Voltage - Supply, Single/Dual (±) | 2.4V~12V ±2.4V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Supply Voltage Limit-Max | 6.3V |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Current - Quiescent (Max) | 22mA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5μA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 85dB PSRR |
| Current - Output (Typ) | 20mA |
| Propagation Delay (Max) | 6ns |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LT1711CMS8#PBF Overview
In order to facilitate transportation, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with a CMOS, Complementary, Rail-to-Rail, TTL output is used here.Ready for shipping in Tube package.The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical with Latch comparator.A total of 1 elements can be found in it.A total of 8 pins are included.In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .If you require more pin-to-pin solutions, search LT1711 for more options.The maximum current that can be supplied to this part is 30mA .The part belongs to the UltraFast? series of comparator parts.
LT1711CMS8#PBF Features
CMOS, Complementary, Rail-to-Rail, TTL output capability
with Latch IC
Employing 1 elements
Operates under 0°C~70°C
LT1711CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1711CMS8#PBF linear comparators applications.
- Limit Comparators
- Power management
- High-Speed Differential Line Receiver
- System control and monitoring
- Battery management and protection
- General Purpose Low Voltage Applications
- Current and voltage sensing
- Mobile Phones and Tablets
- Multivibrators and High-Voltage Digital Logic Gates
- General-Purpose, Low-Voltage Applications
