LT1712CGN
| Parameters | |
|---|---|
| Package / Case | SSOP |
| Number of Pins | 16 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Output Type | TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.4V |
| Current - Output | 20mA |
| Propagation Delay | 6 ns |
| Quiescent Current | 22mA |
| Response Time | 5.5 ns |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 5μA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 83.52dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Dual Supply Voltage | 3.5V |
| Min Dual Supply Voltage | 1.2V |
| Dual Supply Voltage | 3V |
| Hysteresis | 100 mV |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
LT1712CGN Overview
The product is packaged in SSOP to facilitate transportation.Output type TTL is used for this comparator.Currently, it consists of only 2 elements.16 pins are present on the comparator.As a result, this comparator displays a quiescent current of 22mA .Based on the voltage formula, the voltage gain of the part is 83.52dB .Comparator electronics is not recommended to operate the system at a temperature above 85°C .Lower temperatures than -40°C are unsuitable for it.There is a maximum voltage supply on the comparator of 12V .There is a minimum supply voltage of 2.4V for this comparator.2 channels cooperate together to maintain the output quality.A 20mA output current is specified for this device.
LT1712CGN Features
TTL output capability
Employing 2 elements
Quiescent Current: 22mA
Voltage Gain: 83.52dB
LT1712CGN Applications
There are a lot of Analog Devices, Inc. LT1712CGN linear comparators applications.
- Automatic Test Equipment
- Battery management and protection
- General-Purpose, Low-Voltage Applications
- System control and monitoring
- Threshold Detectors
- Analog front end
- Alarm and Monitoring Circuits
- Mobile Communications
- High-Speed Sampling Circuits
- Point of load regulators
