LT1713IMS8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2001 |
| Series | UltraFast™ |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | LT1713 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Complementary, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Supply Current-Max | 9mA |
| Response Time | 9 ns |
| Voltage - Supply, Single/Dual (±) | 2.4V~12V ±2.4V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 5μA |
| Supply Voltage Limit-Max | 6.3V |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Current - Quiescent (Max) | 7.5mA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 2μA @ 5V |
| Hysteresis | 100mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 20mA |
| Propagation Delay (Max) | 11ns |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
LT1713IMS8 Overview
To facilitate transportation, it comes packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a type CMOS, Complementary, Rail-to-Rail, TTL output.Electronic comparator is shipped by Tube .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component here belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical with Latch comparator.This element consists of 1 elements in total.Electronic comparator has 8 pins.The recommended mounting method is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .You can search LT1713 if you are looking for more pin-to-pin solutions.In order to run the device, there are only 3/5V power supplies required.With a minimum current of 9mA , this part can be supplied.A comparator part from the UltraFast? series is used in this part.
LT1713IMS8 Features
CMOS, Complementary, Rail-to-Rail, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
LT1713IMS8 Applications
There are a lot of Linear Technology/Analog Devices LT1713IMS8 linear comparators applications.
- Infotainment & cluster
- Metering Systems
- General-Purpose, Low-Voltage Applications
- Analog front end
- Industrial
- Mobile Communications
- Power management
- Zero-Crossing Detectors
- Mobile Phones and Tablets
- Pulse, Squarewave, and Time Delay Generators
