Parameters |
CMRR, PSRR (Typ) |
70dB CMRR, 80dB PSRR |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2001 |
Series |
UltraFast™ |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LT1713 |
Pin Count |
8 |
Output Type |
CMOS, Complementary, Rail-to-Rail, TTL |
Number of Elements |
1 |
Power Supplies |
3/5V |
Output Current |
20mA |
Propagation Delay |
11 ns |
Quiescent Current |
7.5mA |
Supply Current-Max |
9mA |
Response Time |
9 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
2.4V~12V ±2.4V~6V |
Input Offset Voltage (Vos) |
3mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Voltage Gain |
69.54dB |
Average Bias Current-Max (IIB) |
5μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6.3V |
Input Bias Current |
2μA |
Neg Supply Voltage-Max (Vsup) |
-6.3V |
Current - Quiescent (Max) |
7.5mA |
Voltage - Input Offset (Max) |
4mV @ 5V |
Current - Input Bias (Max) |
2μA @ 5V |
Hysteresis |
100 mV |
LT1713IMS8#PBF Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with a CMOS, Complementary, Rail-to-Rail, TTL output is used here.The part is shipped by Tube .The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.Speaking of types, this is a typical with Latch comparator.This is a 1 element comparator.There are 8 pins on this board.Surface Mount universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .Electronic comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching LT1713 .There is a quiescent current of 7.5mA in this comparator.The device can be run with 3/5V power supplies.The voltage formula shows that the part has a voltage gain of 69.54dB .The part can be powered at a minimum current of 9mA .The part is from UltraFast? comparator series.
LT1713IMS8#PBF Features
CMOS, Complementary, Rail-to-Rail, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 7.5mA
Voltage Gain: 69.54dB
LT1713IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1713IMS8#PBF linear comparators applications.
- RC Timers
- General Purpose Low Voltage Applications
- Wireless Base Stations
- System control and monitoring
- Power management
- Wearable Devices
- Building automation
- Alarm and Monitoring Circuits
- Ultra-Low Power Systems
- High-Speed Sampling Circuits