LT1713IMS8#TR
| Parameters | |
|---|---|
| Propagation Delay (Max) | 11ns |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | UltraFast™ |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | LT1713 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Complementary, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Supply Current-Max | 9mA |
| Response Time | 9 ns |
| Voltage - Supply, Single/Dual (±) | 2.4V~12V ±2.4V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 5μA |
| Supply Voltage Limit-Max | 6.3V |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Current - Quiescent (Max) | 7.5mA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 2μA @ 5V |
| Hysteresis | 100mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 20mA |
LT1713IMS8#TR Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.A comparator with a CMOS, Complementary, Rail-to-Rail, TTL output is used here.This device is designed in Tape & Reel (TR) case.There are 8 terminals on the comparator.The electrical component here belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as with Latch .Electronic comparator has a total of 1 elements.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.You can find more pin-to-pin solutions by searching LT1713 .The part can be supplied with a minimum current of 9mA .Comparator electronics is a comparator part from the UltraFast? series.
LT1713IMS8#TR Features
CMOS, Complementary, Rail-to-Rail, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
LT1713IMS8#TR Applications
There are a lot of Linear Technology/Analog Devices LT1713IMS8#TR linear comparators applications.
- Current and voltage sensing
- Metering Systems
- Window Comparators
- Appliances
- Self-diagnostics
- General-Purpose, Low-Voltage Applications
- RC Timers
- Wearable Devices
- Wireless Base Stations
- Ultra-Low Power Systems
