LT1714IGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2001 |
| Series | UltraFast™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1714 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Complementary, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Supply Current-Max | 9mA |
| Response Time | 8.5 ns |
| Voltage - Supply, Single/Dual (±) | 2.4V~12V ±2.4V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 5μA |
| Supply Voltage Limit-Max | 6.3V |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Current - Quiescent (Max) | 7.5mA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 2μA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 20mA |
| Propagation Delay (Max) | 11ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9116mm |
| RoHS Status | ROHS3 Compliant |
LT1714IGN#PBF Overview
In order to facilitate transportation, it is packaged in 16-SSOP (0.154, 3.90mm Width) .A comparator with an output type of CMOS, Complementary, Rail-to-Rail, TTL is being used.The part is shipped by Tube .As you can see, the comparator has16 terminals.The electrical component here belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as with Latch .Electronic comparator has a total of 2 elements.A total of 16 pins are included.Electronic comparator is recommended that the mounting type be Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.You can find more pin-to-pin solutions by searching LT1714 .With this part, a minimum current of 9mA can be supplied.The part belongs to the series of comparator UltraFast? .
LT1714IGN#PBF Features
CMOS, Complementary, Rail-to-Rail, TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
LT1714IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1714IGN#PBF linear comparators applications.
- Threshold Detectors
- Set Top Boxes
- Simple Analog-to-Digital Converters (ADCs)
- Zero-Crossing Detectors
- Appliances
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Wearable Devices
- Infotainment & cluster
- Industrial
