LT1715IMS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | UltraFast™ |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | LT1715 |
| Pin Count | 10 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | +-5V |
| Output Current | 20mA |
| Max Supply Current | 4mA |
| Propagation Delay | 9 ns |
| Quiescent Current | 2mA |
| Response Time | 6 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Input Offset Voltage (Vos) | 2.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6.6V |
| Input Bias Current | 6μA |
| Neg Supply Voltage-Max (Vsup) | -6.6V |
| Current - Quiescent (Max) | 2mA |
| Voltage - Input Offset (Max) | 2.5mV @ ±5V |
| Current - Input Bias (Max) | 6μA @ ±5V |
| Hysteresis | 6mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LT1715IMS Overview
For convenience, it is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .The comparator has an output type of CMOS, Rail-to-Rail, TTL .Electronic comparator is shipped by Tube .As you can see, the comparator has10 terminals.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical General Purpose comparator.Currently, it consists of only 2 elements.The device includes 10 pins.The type of mounting recommended is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .There are 10 pins on the comparator.You may wish to search LT1715 for more solutions that address your specific needs.The comparator displays a quiescent current of 2mA .If the current supply exceeds 4mA , the comparator could malfunction.The device can be run with +-5V power supplies.Comparator electronics comes from the series of UltraFast? comparator parts.
LT1715IMS Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 2mA
LT1715IMS Applications
There are a lot of Linear Technology/Analog Devices LT1715IMS linear comparators applications.
- Mobile Communications
- Wireless Base Stations
- Simple Analog-to-Digital Converters (ADCs)
- Battery-Powered Electronics
- Analog front end
- Power management
- Set Top Boxes
- Multivibrators and High-Voltage Digital Logic Gates
- DC/DC and AC/DC power supplies
- High-Speed Sampling Circuits
