LT1721IGN#PBF
| Parameters | |
|---|---|
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 6μA |
| Current - Quiescent (Max) | 7mA |
| Voltage - Input Offset (Max) | 3mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| Hysteresis | 7mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | UltraFast™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1721 |
| Pin Count | 16 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Output Current | 20mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 7mA |
| Supply Current-Max | 28mA |
| Response Time | 7 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V |
| Input Offset Voltage (Vos) | 3mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
LT1721IGN#PBF Overview
Electronic comparator is packaged in 16-SSOP (0.154, 3.90mm Width) for convenient transportation.There is a CMOS, Rail-to-Rail, TTL output type for this comparator.The chip is packaged with Tube .There are16 terminals on the comparator.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as General Purpose .Currently, it consists of only 4 elements.The device is equipped with 16 pins.The recommended mounting type is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator is equipped with 16 pins.You can search LT1721 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 7mA volts.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.A minimum current of 28mA can be supplied to this part.Comparator electronics is part of the UltraFast? comparator series.
LT1721IGN#PBF Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 7mA
LT1721IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1721IGN#PBF linear comparators applications.
- Ultra-Low Power Systems
- Portable and Battery-Powered Systems
- Infotainment and Clusters
- Battery-Powered Electronics
- Mobile Communications
- Point of load regulators
- General-Purpose Portable Devices
- Window Comparators, Multivibrators
- DC/DC and AC/DC power supplies
- Appliances
