LT1721IGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | UltraFast™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1721 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Supply Current-Max | 28mA |
| Response Time | 7 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V |
| Average Bias Current-Max (IIB) | 6μA |
| Supply Voltage Limit-Max | 7V |
| Current - Quiescent (Max) | 7mA |
| Voltage - Input Offset (Max) | 3mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| Hysteresis | 7mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 20mA |
| Propagation Delay (Max) | 10ns |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LT1721IGN#TRPBF Overview
To facilitate transportation, it comes packaged in 16-SSOP (0.154, 3.90mm Width) .A comparator with a CMOS, Rail-to-Rail, TTL output is used here.This device is designed in Tape & Reel (TR) case.The comparator has a total of 16 terminals.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.It's a typical General Purpose comparator.A total of 4 elements can be found in it.There are 16 pins on this board.Electronic comparator is recommended that you mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.In case you are looking for more pin-to-pin solutions, you may want to search LT1721 .The device can be run with 3/5V power supplies.Providing a minimum current of 28mA is possible for this part.A comparator part from the UltraFast? series is used in this part.
LT1721IGN#TRPBF Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
LT1721IGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1721IGN#TRPBF linear comparators applications.
- Point of load regulators
- Window Comparators
- Motor drives
- Laptop Computers
- General-Purpose, Low-Voltage Applications
- Alarm and Monitoring Circuits
- Infotainment and Clusters
- Self-diagnostics
- Portable and Battery-Powered Systems
- General-Purpose Portable Devices
