LT1723CMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1723 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Power Supplies | 5/+-5V |
| Operating Supply Current | 3.7mA |
| Supply Current-Max | 11.9mA |
| Slew Rate | 70V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 400μV |
| Bandwidth | 200MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 200000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.35μA |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 150μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.3μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 200MHz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1723CMS8#PBF Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Voltage Feedback-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 8. There are a total of 8 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 8 pins. Regarding input offset voltage, op amp rates 400μV. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . As long as the supply current of the chip does not exceed 3.7mA, this op amp ic can operate. Keeping the voltage gain at 80dB is the best course of action. There are 2 elements in this buffer amplifier.
LT1723CMS8#PBF Features
8 Pins
supply voltage of 5V
80dB voltage gain
LT1723CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1723CMS8#PBF Instrumentational OP Amps applications.
- High input resistance broadband
- Digital cameras
- ECG equipment
- Radiation thermometry transducers
- Home audio systems
- Addition operation circuits
- Inverse/same-phase proportional circuit
- Instrumentation
- High gain DC amplifier
- Band-stop filter
